Dodge Nitro Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Dodge Nitro Knowledge Base
    First : this is for informational reference only and if you make a mistake it's on you. Next the reason I did this to my Rig is two weeks ago my rear caliper was hanging up and had to replace right side caliper and rear pads. I thought it was because I had driven thru high water as we have been...
  2. Dodge Nitro Exterior Modifications
    I like it , But if you ask me they could have gave me the correct screw studs for the back of the inserts. Also the bungs welded to the back of the inserts on the bottom of top inserts should have been in a different spot. Actually had to remove one on each inserts.
  3. Dodge Nitro Mechanical Problems and Questions
    After extensive work and replacing everything including :Evap Purge Valve , Evap Leak Pump I started replacing Plastic Lines from the Purge valve back to the Leak Pump. And here is what I found. But keep in mind I installed JBA headers last summer and That is what I think started the problem...
  4. Custom Dodge Nitro Interior and Exterior Lighting
    Finally found some lights I like on my grille guard . I thought about the LED light bar as some members have done? But after thinking about it , my CCFL headlights are round and my headlights are still the Halogens too. So I decided on these, their PIAA 3.5" which fit perfectly in the opening...
  5. Dodge Nitro Mechanical Problems and Questions
    I've been down this road before! Not with my Nitro but with a Hyundai I used to own . Starting out with a new gas cap and clean the matting surface on the fuel filler tub.
1-5 of 5 Results