Dodge Nitro Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Dodge Nitro Knowledge Base
    First : this is for informational reference only and if you make a mistake it's on you. Next the reason I did this to my Rig is two weeks ago my rear caliper was hanging up and had to replace right side caliper and rear pads. I thought it was because I had driven thru high water as we have been...
  2. Dodge Nitro Exterior Modifications
    I like it , But if you ask me they could have gave me the correct screw studs for the back of the inserts. Also the bungs welded to the back of the inserts on the bottom of top inserts should have been in a different spot. Actually had to remove one on each inserts.
  3. Dodge Nitro Mechanical Problems and Questions
    After extensive work and replacing everything including :Evap Purge Valve , Evap Leak Pump I started replacing Plastic Lines from the Purge valve back to the Leak Pump. And here is what I found. But keep in mind I installed JBA headers last summer and That is what I think started the problem...
  4. Custom Dodge Nitro Interior and Exterior Lighting
    Finally found some lights I like on my grille guard . I thought about the LED light bar as some members have done? But after thinking about it , my CCFL headlights are round and my headlights are still the Halogens too. So I decided on these, their PIAA 3.5" which fit perfectly in the opening...
  5. Dodge Nitro Mechanical Problems and Questions
    I've been down this road before! Not with my Nitro but with a Hyundai I used to own . Starting out with a new gas cap and clean the matting surface on the fuel filler tub.
  6. Dodge Nitro Interior Modifications
    Yesterday I received my Brandmotion back up camera. Now to run the wire from the lift gate to the head unit. A lot of panels and routing to do. Maybe next weekend. 3 day weekend ! Now the planning begins ! o_O Any tips or suggestions will be appreciated.
  7. Detailing and General Maintenance Forum
    Beware Of build date when it comes to where your PCV is located on 3.7's. And thought an easy buy at local parts store. Wrong , Not even showing at Autozone computer ! Ended up at Dodge Dealer parts desk. they sold me the right one but showed me the wrong location on the Vehicle placement. Said...
  8. Dodge Nitro General Discussion
    Ordered and received Vent Visors today. Hey, I have time tonight ! lets install them ! Left drivers side good to go. Starting to look good! :) Left rear on , " Nice". On to passenger side front. Getting there.o_O Clean the track for right rear, get out the last Visor.... AND... :mad: CRACKED ...
  9. Dodge Nitro Electrical Problems and Questions
    This weekend I installed new struts and when I moved the TIPM out of the way to get to the upper strut tower nuts I discovered that when they did the recall to put wiper relays in and by pass the TIPM they did the SHITTIEST job you could imagine! One more reason to never trust what the Dealer...
  10. Chassis - Suspension - Wheels and Tires
    Bilstein shocks by Stevenitrosublette posted Dec 6, 2015 at 7:32 PMBilstein Struts by Stevenitrosublette posted Dec 6, 2015 at 7:32 PMCCFL Fog Halo's by Stevenitrosublette posted Dec 6, 2015 at 7:31 PM It's been a long weekend but installed my Bilstein Struts & shocks. Also my Xmas present the...
  11. Dodge Nitro Exterior Modifications
    Has anyone in the USA managed to buy a front air damn that's on the Euro Nitro ? Can it be bought here in the US?
  12. Dodge Nitro General Discussion
    Took my Wife's car in for a recall and they gave me a 2016 Acadia with 50 miles on it. GIVE ME MY NITRO ANYDAY ! Don't get me wrong the Acadia was nice an all with all the bells and whistles, even free Satellite while we had it. But I seriously missed driving my Nitro, even for one day. Looking...
1-12 of 12 Results