Looking to lift my heat. Finally. I was set on OME lift from JBA but that doesn’t seem to be an option anymore. Any suggestions to get about 2in higher in this thing? RRO seems to be a bad idea and daystar lift really isn’t on my radar
Today I put a USB port in the center console. I had to remove the console to put it in so I also decided to finally clean it. It's amazing what light khaki really looks like! LOL
Soap and water did nothing and the only thing I could find under the sink was "Fantastic".
Never used the stuff...
As the title says... ABS, ESP ,BAS Traction lights on. Now it's my turn.
I was sitting in a parking lot talking on my Phone when I decided to leave. (Yes I have Blue-tooth and U-connect)
As I was exiting the lot onto the street, just as my front tire went thru the gutter, I heard a click.
BOOM...
had ac work done on my 2010 nitro sxt 8/2018 condenser had a hole in it changed out everything that was recommended with changing the condenser lines were vacuumed. Ac got cold and took freon. A couple of months ago it got a cold snap and I turned on the heat after that it only blows hot and...
Hey gang, could anyone out there recommend coil-over suggestions for my 2007 Dodge Nitro RT? I replaced the stock 20 rims with 18's and dressed them with P265/20/R18 tread. I went ahead and installed new pads with drilled/slotted rotors and a pair of 2 inch wheel spacers in the rear to stagger...
So a friend of mine gave me these led brake / tail lights . I knew I should not of tried it ! it shorted out the left taillight fuse and now my left brakelight does not work . Looked for another blown fuse and can't find it ? Any help on this issue would be appreciated.
So I think my transmission oil cooling lines or line, maybe one or the other is leaking . More on that today when I get it up on the lift after work.
Looking at mopar online parts.com to order . Need part numbers though.
First : this is for informational reference only and if you make a mistake it's on you.
Next the reason I did this to my Rig is two weeks ago my rear caliper was hanging up and had to replace right side caliper and rear pads. I thought it was because I had driven thru high water as we have been...
Way back when I first joined the forum, I asked for suggestions on how to run the wires for my off-road lights, on my rack.
Needless to say, I was able to get it done and they worked OK for what they were.
I actually designed the rack to fit the lights I used. I used standard incandescent spot...
Have not been on the forum for a while.
Hello everyone! So as I'm replacing my rear brake pads and one frozen caliper I discovered the axle bearings are pretty much shot. I can shake the rear wheels and a lot of play with the axle bearings on both sides.
So I want to replace with Nitro Gear...
Holiday time, and time to post your Pics of Nitro's helping you out during the season.
I forgot to get Pics in the field, but here is one when we got home.
Had to cut the wheels off to get the tree in the Pic...
After the cold ride home on the top of the Nitro the tree wanted to get inside...
I like it , But if you ask me they could have gave me the correct screw studs for the back of the inserts. Also the bungs welded to the back of the inserts on the bottom of top inserts should have been in a different spot. Actually had to remove one on each inserts.
After extensive work and replacing everything including :Evap Purge Valve , Evap Leak Pump I started replacing Plastic Lines from the Purge valve back to the Leak Pump. And here is what I found. But keep in mind I installed JBA headers last summer and That is what I think started the problem...
Finally found some lights I like on my grille guard . I thought about the LED light bar as some members have done? But after thinking about it , my CCFL headlights are round and my headlights are still the Halogens too. So I decided on these, their PIAA 3.5" which fit perfectly in the opening...
I've been down this road before! Not with my Nitro but with a Hyundai I used to own . Starting out with a new gas cap and clean the matting surface on the fuel filler tub.
I ve got dodge nitro 2.8l 2007. I bought this couple of months ago.It has done 114000 recently. I am not sure when to change the timming belt. It would be a great help if anyone can help me with this ..
I read someone's post a few day's ago about these shorty headers and had to check out the EBay sale on them for less then 1/2 the regular price . $200.00
My question is " am I going to benefit in Mpg's ?" I do have the K&N, Borla cat back & jet chip . But what benefits other then the better...
This How To is for information only ! I'm not responsible for any mistakes you might make if you choose to replace your water pump ! First I noticed a small puddle of Anti-freeze under my Nitro over the last few weeks. Not much but enough to make me have to find the problem. I tried looking...
Beware Of build date when it comes to where your PCV is located on 3.7's. And thought an easy buy at local parts store. Wrong , Not even showing at Autozone computer ! Ended up at Dodge Dealer parts desk. they sold me the right one but showed me the wrong location on the Vehicle placement. Said...