Dodge Nitro Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Got a 10 nitro mail conversion right hand drive brakes are locking down not just one all of them have replaced 2 calipers one before and one after this started wondering if anyone else has run into this problem no lites on dash when it happens can release blender on any wheel and it will release presser then do fine until next time thinking master cylinder but never had this happen before
 

·
Khaki Nitro Nut
07Lifted,4X4,6sp-man,3.7L
Joined
·
30,305 Posts
Nitro brake calipers are known for sticking. Last time I had an issue I replace the offending one with a caliper which has a metal plunger.
 
  • Like
Reactions: Nitrogen

·
Registered
Joined
·
18 Posts
What's the problem of the sticky plungers? Material? Tolerances?
 

·
Khaki Nitro Nut
07Lifted,4X4,6sp-man,3.7L
Joined
·
30,305 Posts
  • Like
Reactions: Nitrogen

·
Registered
Joined
·
5,073 Posts
also corrosion on the callipers creating excessive pressure between the rubber seals and pistons, causing the pistons to stick, especially driving in the city with lots of braking, the brakes get hot and make things alot worse.
 
  • Like
Reactions: Scar0
1 - 5 of 5 Posts
Top