[Priss218]

So i have a major issues.

1. When i first bout my 07 sxt nitro in 11/06 i remembered that the seats
were supposed to be stain resistant. My seat are bad. They had stains and i tried cleanin them myself but left big water spots and it looks ugly. So i dont know what to do.

2. I live on a bumpy road and it hit a big pothole and on my lefthand side part of the guard i guess you can say chipped off or broke. Its the part underneath the foglights. I dont know how i could fix it or replace it or do i have to replace the whole thing.

Can somebody please help.:shakehead:

 

[LBZSXT]

i thought that my seats had the yes fabric then found out the sxt don't come with it but the slt and r/t come stock with it guess we both got it wrong

 

[BlueJet]

Try looking at this thread:
http://www.nitroforumz.com/showthread.php?t=112&highlight=seat+stains

 

[dk1677]

So i have a major issues.

1. When i first bout my 07 sxt nitro in 11/06 i remembered that the seats
were supposed to be stain resistant. My seat are bad. They had stains and i tried cleanin them myself but left big water spots and it looks ugly. So i dont know what to do.

2. I live on a bumpy road and it hit a big pothole and on my lefthand side part of the guard i guess you can say chipped off or broke. Its the part underneath the foglights. I dont know how i could fix it or replace it or do i have to replace the whole thing.

Can somebody please help.:shakehead:

Only if you have the Yes fabric, The regular satins easily , BJ posted a good link, Oxy cleaners work well and NitroTech said that MOPAR fabric cleaner is very good and a unit like Bissell's Green machine works great ( carpets too naturally!) The air dam under the bummer what its sounds like that can be replaced ( CanadianLimey had that happen)

 

[Scar0]

Just take off the air dam. I think it looks better with out it. The first mod I did was to remove it from mine.
See this. http://www.nitroforumz.com/showthread.php?t=9875

 

[KenCary]

Just take off the air dam. I think it looks better with out it. The first mod I did was to remove it from mine.
See this. http://www.nitroforumz.com/showthread.php?t=9875

What did you use to cut off your airdam- a sawzall, hot knife? How did you finish it off with a sander? Did you remove the lower bumper portion before cutting or do it on the Truck?

 

[Quiet Lunatic]

I took mine to work traced out my desired shape, cut it on the bandsaw, then smoothed it out using my 90' grinder and finally finished by hand with fine emery.

 

[Quiet Lunatic]

I took mine to work traced out my desired shape, cut it on the bandsaw, then smoothed it out using my 90' grinder and finally finished by hand with fine emery.

I bought a new one as a spare. It was about $65.

 

[Scar0]

What did you use to cut off your airdam- a sawzall, hot knife? How did you finish it off with a sander? Did you remove the lower bumper portion before cutting or do it on the Truck?

I just removed it, I did not Cut anything. Mine looks like Pic 5 in the how-to. Looks good from far away and up close you have to bend over to see that it is missing. Gives it that off road look.

 

[oldmanjob]

Has anyone with the non yes cloth seats scotch guarded them. Is any one out there, been a week and I hear the sound of silence.

 

[zmass]

I DONT HAVE YES FABRIC?????WHAT??????!!

Thats part of the reason i bout the car so i could have my niece and nephew in it and not worry about them ruining it!!!

Well i have brown burnt looking spots on my ceiling by the passenger visor.
Their is no smoking in my car so i THINK it is maskera.

I oxycleaned it for about 15 minutes and its ALMOST gone... do it one more time and it will be.

but the fact that i dont have YES fabric just plain sucks:i_rolleyes: