Dodge Nitro Forum banner

Electrical Problem With My Dodge Nitro 2007

16K views 22 replies 7 participants last post by  granzotto.usa 
Welcome to the forum yo1andy.

When you have a chance, head over to the Newbie Section and say "Hi".
Tell us a little about yourself and your ride.
That way we can welcome you all proper like.

TIPM or ground would be my guess as well.
But, do you get a "No Bus" message in the cluster when this happens?
 
Pull the drivers side kick panel off and check the ground wires under it.
 
Communication Error - If the cluster fails to receive a selected gear message from the PCM within three seconds, the instrument cluster will display all gear selector positions until a valid selected gear message is received or until the ignition switch is turned to the OFF position.
This would indicate a problem with the CAN (Computer) network.
 
Welcome to the forum @Adam Cole Bay Bay. When you have a chance, head over to the Newbie Section (<click this) and say "Hi".
Tell us a little about yourself and your ride.
That way we can welcome you all proper like.

Did you try anything in this thread?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top