Joined
·
2,138 Posts
FOG LAMP BULB
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.
1. Disconnect and isolate the battery negative cable.
2. Reach up between the lower edge of the front fascia (2) and the front of the front wheel house splash shield to access and disconnect the front end module wire harness connector (3) from the front fog lamp bulb (1) connector receptacle.
3. Firmly grasp the bulb on the back of the front fog lamp housing and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the bulb straight out from the keyed opening in the housing.
CAUTION: Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.
1. Disconnect and isolate the battery negative cable.
2. Reach up between the lower edge of the front fascia (2) and the front of the front wheel house splash shield to access and disconnect the front end module wire harness connector (3) from the front fog lamp bulb (1) connector receptacle.
3. Firmly grasp the bulb on the back of the front fog lamp housing and rotate it counterclockwise about 30 degrees to unlock it.
4. Pull the bulb straight out from the keyed opening in the housing.