Dodge Nitro Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
Hi everyone,
tried to find it in the manual, but it’s not giving me the amounts of fluid to get.
Any tips for this newbie?

thanks so much
 

·
Registered
Joined
·
34 Posts
Discussion Starter #2
found an old thread and got my answer. Is it ok if I copy / paste it here?

thanks Scar0 for posting about it before:
“The SM recommends;
Mopar Lubricant SAE 80W-90 Multipurpose Type, GL-5 Gear Lubricant or equivalent, for the front (2.6 pints).
Mopar SAE 75W-140 Synthetic Gear Lubricant or equivalent (4.4 pints), for the rear.
There is no mention of a friction modifier/ or limited slip additive for the rear. It won't hurt anything to be in there, but it is not mentioned in the SM“
 

·
Registered
Joined
·
52 Posts
Since the rear requires slightly more than 2 bottles and the front slightly less, I topped off the rear with some of the fluid from the front. Probably not kosher, and some may disagree, but it works. They're not that different.
 
1 - 3 of 3 Posts
Top