Looking for a harmonic balancer for the 4.0 engine. Just found out mine went out and its a discontinued part, so if someone has one to spare or an idea where to find one it would greatly be appreciated
Joined
·
117 Posts
Have you done a Google and ebay search
Joined
·
3 Posts
I have and it only pulls up one's for the 3.7 engine
Joined
·
117 Posts
Ahh I see I remember one of the cryshler minivans also has a 4.0 maybe see if you can find one for it
Joined
·
117 Posts
Ahh I see sorry
Joined
·
7 Posts
Well I am having the same luck! Actually kinda worse. Because mine was fine until we couldn't get the correct puller at first so the guys kept trying and broke mine
I was only replacing my water pump. Because my seal had failed. Now I am stuck with my only vehicle and it can't be fixed because we can't get the part we need!
Joined
·
54 Posts
Best info i can give you is to call this man at Saratobic Plastics, His name is John and he has access to The Wire which is a junkyard hot line for used parts, I spent 4 weeks hunting on my own and this gentleman found 1 for me in 3 days off The Wire. his number is 1-877-276-7278. I wish you luck.Well I am having the same luck! Actually kinda worse. Because mine was fine until we couldn't get the correct puller at first so the guys kept trying and broke mine
rockauto lists two aftermarket options based on the Pacifica 4.0L, and the exact mopar part from the Nitro. (mopar 4892271AA)
If you check Dayco's part listing it lists all the models that have the 4.0L, except the Nitro, as listed here.
I'm not sure what would be different about the same 4.0L balancer on the Nitro vs the other applications of it--although it is tuned to slightly higher output--I doubt the balancer would be part of that.
The Dayco balancer is on amazon as well as rockauto. If it fits--seems like for some odd reason the Nitro 4.0L might use a different one. Maybe a dealer can check for sure, but parts searching I've done is inconclusive on that point.
If you knew the size specs, it's possible ATI makes one that fits. here's their catalog. They respond to emails in a day or two. I think they'll make custom sizes if you want to go that route.
Worst case you'll have to do as suggested above and use one of the pick-n-pull sources. Several have nation-wide online sourcing and ordering now.
If you check Dayco's part listing it lists all the models that have the 4.0L, except the Nitro, as listed here.
I'm not sure what would be different about the same 4.0L balancer on the Nitro vs the other applications of it--although it is tuned to slightly higher output--I doubt the balancer would be part of that.
The Dayco balancer is on amazon as well as rockauto. If it fits--seems like for some odd reason the Nitro 4.0L might use a different one. Maybe a dealer can check for sure, but parts searching I've done is inconclusive on that point.
If you knew the size specs, it's possible ATI makes one that fits. here's their catalog. They respond to emails in a day or two. I think they'll make custom sizes if you want to go that route.
Worst case you'll have to do as suggested above and use one of the pick-n-pull sources. Several have nation-wide online sourcing and ordering now.
1 - 9 of 9 Posts
Join the discussion
