Dodge Nitro Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello community,

My car had an aftermarket radio installed and the previous owner cut off the plug to the OEM radio and replaced with the fitting aftermarket plug. I bought the MYGIG rbz 430 and want to connect it to the existing OEM wiring harness. I checked the web but could not find any useful pinouts showing where the harness cable would go into the radio. I am especially confused which position the CAM bus neg and pos cables go. I have a marker of A at the position 6 at the radio plug receiver and saw in a video on youtube that you need a 12v connector cable to have the radio starting up. The positive cable on position 1 is not enough. Below is my plug receiver of the RBZ 430. Any help with pinouts or cable layouts for this model are highly appreciated.

Thanks
 

Attachments

·
Khaki Nitro Nut
07Lifted,4X4,6sp-man,3.7L
Joined
·
30,459 Posts
Welcome to the forum @hans_grouper. When you have a chance, head over to the Newbie Section (<click this) and say "Hi".
Tell us a little about yourself and your ride.
That way we can welcome you all proper like.

See
 
  • Like
Reactions: Nitrogen
1 - 2 of 2 Posts
Top