Dodge Nitro Forum banner
1 - 20 of 21 Posts

·
Registered
Joined
·
246 Posts
Discussion Starter · #1 ·
I was just wondering is there a site i can buy those off road lights like the jeep liberty has... i have seen it on nitros on the gallery above? Thanks
 

·
Registered
Joined
·
1,295 Posts
Lighting & Electrical > Light Bars > Light Bar
82206126AB
Light Bar
Renegade Style, Complete with four lights, wiring harness, switch and light covers
$460.00
 

·
Registered
Joined
·
790 Posts
So what are the chances that Liberty light bar actually fits on the Nitro too? Isn't the Nitro like 4" wider? But the roof has those black side rails too.
Wonder what it does to the wind going in/over the sunroof.
 

·
Registered
Joined
·
790 Posts
Check them out on Ebay Tpmick. They go for $400 or $500 though. And the wiring is pretty tightly integrated to the Jeep Liberty. So to pull it off, you'd have to rewire it to set it up on a Nitro. Definitely looks cool though.
 

·
Registered
Joined
·
5,585 Posts
Check them out on Ebay Tpmick. They go for $400 or $500 though. And the wiring is pretty tightly integrated to the Jeep Liberty. So to pull it off, you'd have to rewire it to set it up on a Nitro. Definitely looks cool though.
This would be an awesome mod for somebody with more mechanical and electrical savvy than I do! :p I would love to try it, but I would need help, I know that! :shakehead: I looked through the installation instructions here:

http://www.jeepprojects.com/content.php?article.30

There are many things I don't understand from the rough drawings provided! For instance, in step 14, what is that little picture between the one where they are deburring the drilled hole and the one showing an air compressor handle?

In step 22, what are these thingies? Are they some sort of grounding apparatus? In step 28, they show some sort of connectors from what I can tell, but I'm not sure what they connect.

In step 36, they show a bezel attachment for the LED light, is it possible to get one of these separately? I got an alarm system installed recently, but don't like the look of the hole around the LED on the top of the dash. :(
 

·
Registered
Joined
·
52 Posts
the renegade lightbar fits on nitro ive got one in grarge of my kj jeep before having another one made .also i have a morpar roothrack for a kj . which also fits the nitro siderails .nitro still new yet . may be put them next year
 

·
Registered
Joined
·
5,585 Posts
the renegade lightbar fits on nitro ive got one in grarge of my kj jeep before having another one made .also i have a morpar roothrack for a kj . which also fits the nitro siderails .nitro still new yet . may be put them next year
are you planning on putting the lightbar on your Nitro?:rolleyes:
 

·
Registered
Joined
·
5,585 Posts
Waldorf- I think its paint or sealer for the raw metal edge of the hole in step 14.
you know, sometimes the pictures aren't obvious in their meaning. but I think after deburring, I would use the air thingy to clean away any loose filings BEFORE I would paint or use a sealer such as silicone. what do you think? :confused:
 

·
Registered
Joined
·
1,420 Posts
the renegade light-bar fits on the nitro I've got one in garage off my kj jeep before having another one made. Also i have a mopar roof-rack for a kj . which also fits the nitro side-rails. nitro still new yet . maybe put them on next year
David-what is the width (overall) of the light bar in inches measured from each outside edge? Also, what is the wattage of each light? The ones on eBay don't list the size lights.
 

·
Registered
Joined
·
1,420 Posts
you know, sometimes the pictures aren't obvious in their meaning. but I think after deburring, I would use the air thingy to clean away any loose filings BEFORE I would paint or use a sealer such as silicone. what do you think? :confused:
I think the air compressor is to speed dry the paint on the roof you have to use after you scratch the hell out of it with the 1" hole saw!:D
 

·
Registered
Joined
·
5,585 Posts
I think the air compressor is to speed dry the paint on the roof you have to use after you scratch the hell out of it with the 1" hole saw!:D
that's so funny! :chuckle: It shows you how people can interpret things differently!
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top