Dodge Nitro Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
12 Posts
Discussion Starter · #1 · (Edited)
Ithought it would be cool to have somthing painted on that cooler.
I cut a stencil out of thin cardboard (like the back of a notebook) and used clamps to attach it to the cooler taped off for overspray and did three light coats of rustoleum it should hold up if not it can be redone ill let you know how long it lasts any way thought it came out good wanted to share the http://www.nitroforumz.com/PHOTOPOST/showphoto.php/photo/1416/cat/500/ppuser/1555
 

· Registered
Joined
·
2,606 Posts
Ithought it would be cool to have somthing painted on that cooler.
I cut a stencil out of thin cardboard (like the back of a notebook) and used clamps to attach it to the cooler taped off for overspray and did three light coats of rustoleum it should hold up if not it can be redone ill let you know how long it lasts any way thought it came out good wanted to share the http://www.nitroforumz.com/PHOTOPOST/showphoto.php/photo/1416/cat/500/ppuser/1555
Very cool idea. Was your cooler painted black or was it bare aluminum? Mine is bare but I have seen some that were painted.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top