Dodge Nitro Forum banner
1 - 10 of 10 Posts

·
Premium Member
07Lifted,4X4,6sp-man,3.7L
Joined
·
30,657 Posts
Welcome to the forum @P.Mills. When you have a chance, head over to the Newbie Section and say "Hi".
Tell us a little about yourself and your ride.
That way we can welcome you all proper like.
 

·
Registered
Joined
·
576 Posts
How did you prep it all? Specifically the calipers @KansasNitro
I was replacing brake pads anyway, so I took off the calipers, washed them super good with a brush and some degreaser, gave them a couple of coats of primer and then 3 coats of Neon Green Paint.
The wheels, I just 'scuff' sanded them, masked the edges, 2 coats of primer and 3 coats of paint.
Worked like a charm!
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top