Dodge Nitro Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
Does anyone have a part number for the passenger side interior rear quarter trim panel designed for a Nitro with a sub woofer, but not including the sub woofer? Dark Slate. I recently acquired a sub woofer, and would like to make it look as factory as possible. I know the part number 5KH95XDVAD is supposed to be the trim panel including the sub, but I don't want to buy the sub...

Can anyone assist? My factory service manual doesn't seem to have a part number for it.

Thanks,
Dave
 

· Premium Member
07Lifted,4X4,6sp-man,3.7L
Joined
·
29,175 Posts
I believe you have the correct part #. They are describing "the trim" is for a rig "with" a sub woofer. Not the trim & sub woofer.
The other part # without a sub woofer is only $10.00 cheaper. I can't imagine they sell a sub woofer for $10.00.
Hope this helps.
Check here. Select year, make, and model, then search for sub. Or you can search by part #.
 

· Registered
Joined
·
1,786 Posts
Does anyone have a part number for the passenger side interior rear quarter trim panel designed for a Nitro with a sub woofer, but not including the sub woofer? Dark Slate. I recently acquired a sub woofer, and would like to make it look as factory as possible. I know the part number 5KH95XDVAD is supposed to be the trim panel including the sub, but I don't want to buy the sub...

Can anyone assist? My factory service manual doesn't seem to have a part number for it.

Thanks,
Dave

I have looked at it as well I wanted the one without the sub. If you order the rear inner quarter panel all you get is the outside plastic not the inter sub enclosure. I have since changed my mind for know and I am using the stock sub enclosure with a solo square 8” woofer and as mid bass driver. If you end up using a stock enclosure dynamat it or fiber glass the inside because once you put another sub in it with more power it sounds like it is going to fall apart.
 

· Registered
Joined
·
31 Posts
Discussion Starter · #4 ·
I believe you have the correct part #. They are describing "the trim" is for a rig "with" a sub woofer. Not the trim & sub woofer.
The other part # without a sub woofer is only $10.00 cheaper. I can't imagine they sell a sub woofer for $10.00.
Hope this helps.
Check here. Select year, make, and model, then search for sub. Or you can search by part #.
Thanks! This is just the info I needed...

Dave
 

· Registered
Joined
·
31 Posts
Discussion Starter · #5 ·
I have looked at it as well I wanted the one without the sub. If you order the rear inner quarter panel all you get is the outside plastic not the inter sub enclosure. I have since changed my mind for know and I am using the stock sub enclosure with a solo square 8” woofer and as mid bass driver. If you end up using a stock enclosure dynamat it or fiber glass the inside because once you put another sub in it with more power it sounds like it is going to fall apart.
Very good tips. I will definitely do that. It's easy for me to do now because the sub enclosure is in my basement. :)

How'd you fit a square driver in that enclosure? Just cut the enclosure to fit? Or did yours come with a square driver? (I know in my 300 SRT8, some came with round and some came with square Kickers).

Dave
 

· Registered
Joined
·
1,786 Posts
Very good tips. I will definitely do that. It's easy for me to do now because the sub enclosure is in my basement. :)

How'd you fit a square driver in that enclosure? Just cut the enclosure to fit? Or did yours come with a square driver? (I know in my 300 SRT8, some came with round and some came with square Kickers).

Dave
I just cut it to fit.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top