Dodge Nitro Forum banner

power door locks

6K views 11 replies 9 participants last post by  Scar0 
By your description of the operation of your power locks it sounds like the drivers door lock actuator is ratcheting (slipping). It's possible for the Nitro's that required TSB 23-050-06, if not addressed, lead to the problem of the lock actuator slipping. Get the actuator replaced and that should correct your problem.

The second concern you mentioned has been discussed here on the forum but it seems no definitive repair has been found. Check out the thread "Caution your Nitro may die". Lots of discussion can be found there.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top