[Nitro93727]

OK, I know this has been asked, but it hasnt been answered. I do not have a wire harness and need to tie into the illumination for headlights on and off, to have dimmer control on my Aftermarket Head Unit. Does anyone have any info as to which wire we tap into for that? I know the EIA states it should be Orange/White, is it safe to say if I tap into the Orange/White on the Factory Harness, that would be the illumination control to have my headunit dim when headlights are turned on?

 

[Nitro93727]

FYI to all. I tapped into the shift lever illumination connector as suggested below to get the dimmer control working for my AVIC-D3 and it works flawlessly in day/night mode now!

Thanks NitroTech... again :4-jump2:

KickerNitro, you are partially correct on the illumination. On a 42RLE transmission the panel lamps driver circuit is E12 OR/GY. On a NAG1 which would be found in an R/T with the 4.0L there is no panel lamps drivers at the shifter connector.