Hello, I have tried to open this attachment but I keep getting an error message. Has anybody else been able to open the attachment?Ok fellas I took the liberty of combining the info above into a PDF so you can print it out easily and use at your leisure. I hope this helps anyone out who wants to print it to use while in the vehicle doing some wiring. Thanks to NT and BCH for the original info...
Nitro Wire Color Code & Harness Guide:
View attachment 531
Or maybe because video 2 is the video input some of us are looking for? a member of this forum in the thread "Mygig video input" confirmed video signal sent by the rear VES can also be displayed on the Mygig screen!Go down a few posts and print out the pdf. I took a yellow rca cable, cut off one end took some computer motherboard pin cables and soldered the cut end of the rca cable to that and connected the pin ends onto the pins in the back of the head unit on the C3 socket. Video common is the ground on the rca, and video signal is the center cable on the rca. The finished end of the rca routes nicely down the right side of the console riser. Put a dvd in the slot 6 of the cd changer and video came out automagically. I wired up the video 2 the same way but got no output, it must be selectable from the menu on the head unit.
Hello,Here's the complete radio connector pinouts with drawings to identify each connector. Once I've got pics of the back of the radio I add those also.
If anyone has requests for specific connector pinouts or component locations within yor Nitro just ask.
That connector goes to the Handsfree Module (Telematics Module P/N 5064469AA). Also the 22-WAY body connector for the HFM is P/N 05083221AA. Hope that helps. :smileup:Where does the other end of the C1 connector go (location)?
If I remember right from when I tore things apart a year ago, the C1 wiring behind the radio does not go far, only to C202 in the driver's side foot well. The wiring harness that runs between C202 and C313 on the rear quarter panel does not contain the wires to support the hands free module, and the harness that connects the module to C313 does not contain the wires or the connector to the module.Update to previous post. Installed the REN tonight and the C1 connector is there and fully wired. Now the BIG question is where do the wires go. When I had the rear interior torn apart I could not see the 22-pin connector but I did not remove the sub either. Nor did I see the connector for the rear view mirror in the headliner.
Time to hunt down this thing before I go crazy. If I have to take the vehicle apart I will. Going to wait for a free weekend and tear it down.
Hoping to get the Kickers delivered and installed this week and see how the system sounds. I don't expect a concert hall, but at least a little more than the Infinity's.