Radio Connector Pinouts

Hello
I need your help to connect the sound of my Carputer for my dodge nitro radio.
I sought information in the forum, but I'm okay, my radio plate is different from the story.
The model my radio is this: part no. 05064053ak
What I want is to connect the sound through the back of the connector pins using c3 so they do not see anything in front part of the radio
I also get dvd signal to 2 monitors for back seat

 

These are the images that explain how to get the auxiliary input from the radio plate

 

But my plate is this radio





Thanks for your help

 

help needed please dodge nitro 2007 crd 2.8se

I am trying to get hold of a retro loom so that I can connect a LCD Flat Screen Monitor to the roof of my car. Dodge UK wont give me a copy of the wiring diagram so I am hoping you can help me out. Just need it explaining clear so I can hand it over to an auto electrician with the hope he or she can help me out.

Thanks
Stephen :smileup:

 

I have tha same problem ... you resolved its??

 

I have a stereo single disc of CHRYSLER JEEP SINGLE DISC IN DASH RADIO CD UNIT - P/N 05064927AG, can I put to another vehicle? I have the problem of can-bus is it posible to exclude it? How can I shich on the stereo with only the + and - 12 volts? Many thanks Jordan

 

ck3000 parrot

Hi, I have a wrangler JK2008 with exact same stereo. it is a 6-disc dvd changer, probably manufactured by Mopar.
I can't figure from the wiririg diagram, what pins to connect my parrot handsfree device.
I would like to utilize the original speaker and to mute upon call.
For that I need mute signal and audio inputs, anyone?

 

Welcome to the forum. NitroRich from the UK just hooked up a parrot in his Nitro. Hopefully, he will see your post and tell you how he hooked up his.

 

Thanks

it is very hard to find any information about this sot-948 harness, and I find it strange as it is ISO.
Anyways, this forum is being most informative all over the web, i'v been searching fora while now. Can't wait till someone reveals it. Actually I saw that there are some 3rd parties selling those adapter harness, meaning the pin-out can be pulled out.

 

There are all sorts of adapters out there. Be aware that all model year Nitros run on a High Speed CanBus. Do you know how to use the forum? You can send a PM (private message) to NitroRich and ask him how he set his Parrot up. Find a post by him on the forum. Click on his name and a small pull down menu will appear - one of the choices is "send private message". He will see this and respond to you. You can always start a thread in the newbie section, but don't ask the same question. If you do, Scar0 will merge the threads, which, in your case, might be a good idea as this is an old thread and people may not be looking at it.

 

need help! need a wire diagram for my 2007 nitro r/t audio system ! Mine came with the infinity sound 8 total channel infinity amp ! 2 ohm ,dual coil sub , r-doors components ,f-doors, just the 6.75" mids lower dr , front dash corners 2.5" midranges ! very complicated system ! need wire colors ? anyone know , or where ?