Dodge Nitro Forum banner

101 - 111 of 111 Posts

·
Khaki Nitro Nut
Joined
·
29,742 Posts
Sorry I can not see the Pin # on your connector.
Here is the connector pin chart.
If your plug is wired the same as the Nitro plug.
It looks like your plug has 16 wires. The Nitro plug only has 15 wires.

For monitor # 1 you will need these; ( below In red)
For monitor # 2 you will need these; ( below in Green)
Radio C3 - White 22 way
Rear-Seat Video Montior

Code:
1 18GY/LB AUDIO RETURN 3
2 -
3 -
4 -
5 18GY/BR VIDEO SIGNAL 1
6 18GY/YL VIDEO COMMON 1
7 VDO-VIDEO SHIELD 1

8 18GY/LB VIDEO SIGNAL 2
9 18GY/YL VIDEO COMMON 2
10 VIDEO SHIELD 2
11 18GY/OR AUDIO RETURN 2

12 18DG/VT AUDIO LEFT 3
13 18DG/YL AUDIO RIGHT 3
14 -
15 -
16 -
17 -
18 18DG/TN AUDIO LEFT 1
19 18GY/VT AUDIO RETURN 1
20 18DG/WT AUDIO RIGHT 1

21 18DG/LB AUDIO LEFT 2
22 18DG/DB AUDIO RIGHT 2
I just looked in my manuals. Both the 07 and 08 show the above^ are not the correct pinouts for Radio C3 - White 22 way

This is what I show in both the 07 and 08 manuals;
Radio C3 - White 22 way
1 GY/LB AUDIO RETURN 3
2 - -
3 - -
4 - -
5 - -
6 GY/BR VIDEO SIGNAL 1
7 GY/YL VIDEO COMMON 1
8 NA VDO-VIDEO SHIELD 1
9 GY/LB VIDEO SIGNAL 2
10 GY/YL VIDEO COMMON 2
11 NA VIDEO SHIELD 2
12 GY/OR AUDIO RETURN 2
13 DG/VT AUDIO LEFT 3
14 DG/YL AUDIO RIGHT 3
15 - -
16 - -
17 - -
18 DG/TN AUDIO LEFT 1
19 GY/VT AUDIO RETURN 1
20 DG/WT AUDIO RIGHT 1
21 DG/LB AUDIO LEFT 2
22 DG/DB AUDIO RIGHT 2

Sorry I did not catch this sooner, but I never had a reason to look it up.
 

·
Khaki Nitro Nut
Joined
·
29,742 Posts
Very happy to see you have video! Thanks for letting us know!!
Glad we could help out.
If you can connect 8- VIDEO SHIELD 1 (bare wire next to 7), it will lower static in the picture.
 

·
Registered
Joined
·
39 Posts
KickerNitro, you are partially correct on the illumination. On a 42RLE transmission the panel lamps driver circuit is E12 OR/GY. On a NAG1 which would be found in an R/T with the 4.0L there is no panel lamps drivers at the shifter connector.

Anyone know the difference between th "Assy Shift lever" & "PRDNL" branches of the panel light circuit E12 20 OR/GY ?
 

·
Registered
Joined
·
4,910 Posts
OK found it, i see what you mean now, "assy shift lever" is for the RLE transmission and the PRDNL is for the NAG1 transmission, they are both the same thing "interior lighting at shift lever console.

i think they are termed differently because on the RLE the light is fixed to the shifter panel, and on the NAG1 the light is fixed to the shift lever (so moves with the shifter), However this is just a guess
 

·
Registered
Joined
·
39 Posts
OK found it, i see what you mean now, "assy shift lever" is for the RLE transmission and the PRDNL is for the NAG1 transmission, they are both the same thing "interior lighting at shift lever console.

i think they are termed differently because on the RLE the light is fixed to the shifter panel, and on the NAG1 the light is fixed to the shift lever (so moves with the shifter), However this is just a guess
Thank you
 
101 - 111 of 111 Posts
Top