Dodge Nitro Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I recently got my front brakes done. After that when I turn right there is 2 or three grunting sound coming from the front end. What's up?
Also there is a low rattle when I go over rough pavement from the right front. They checked it and found everything tight.
 

·
Registered
Joined
·
5,160 Posts
wheel bearing !.
 

·
Khaki Nitro Nut
07Lifted,4X4,6sp-man,3.7L
Joined
·
30,638 Posts
Was any of this present before the brake work? If not, then the shop needs to make it right.
 

·
Registered
Joined
·
131 Posts
Got a dollar that says they bent the heat shield, over tightened the mugs and caused a temporary warp in the rotor that’s rubbing the shield on a right turn.
Did the same to mine. They tourqued the shit out of the lugs after I asked them to make sure they used the proper ft lbs on my aluminum wheels !
A wheel bearing would make that sound when breaking as well. And for sure when braking while turning.
If the sound is present when making a Ralph and not breaking then the heat shield is tubing the rotor at the bottom.

Like I said got a dollar says that’s exactly what’s going on.
 
1 - 4 of 4 Posts
Top