Dodge Nitro Forum banner
1 - 1 of 1 Posts

·
Registered
07’ SLT 4x4 Lifted, 3.7 auto
Joined
·
814 Posts
easier if you remove the coolant/washer reservoir............BUT i did mine in about 15 minutes without removing it.....just need a long enough ratchet or breaker bar to loosen the tensioner. 24" bar should do it, itll stick up above the reservoir so you can get a good bite on the tensioner. Def dont pay the shop unless you just dont have the tools or experience........if you do id atleast provide a Mopar serp belt so they dont use a cheapo. DO IT QUICK! that belt looks rough.....it breaks going down the road youll wish you did it.
 
1 - 1 of 1 Posts
Top