Dodge Nitro Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
34 Posts
Discussion Starter · #1 ·
OK so one of my rear shocks decided to start leaking so I was searching around for replacement shocks. I contacted Rancho and they just need the size of the rear shock completely compressed and the size completely extended. Before I go and climb under this thing to pull the shock off to measure it... anyone here know what the specs are for them?
 

· Registered
Joined
·
1,322 Posts
Hey there mr8500. Did your lift kit cause the shock to top out and burst? It could be. You should probably just look on a site like Rancho and see what they have for a lifted Liberty and buy a set for the rear that has been lifted about 3". I saw one site that had them broken down by lift height, just can't remember if this was the one or not.

You could also look back to Daystar and see if they had a recommended shock for their lift kits.
 

· Registered
Joined
·
34 Posts
Discussion Starter · #6 ·
Hey there mr8500. Did your lift kit cause the shock to top out and burst? It could be. You should probably just look on a site like Rancho and see what they have for a lifted Liberty and buy a set for the rear that has been lifted about 3". I saw one site that had them broken down by lift height, just can't remember if this was the one or not.

You could also look back to Daystar and see if they had a recommended shock for their lift kits.
I dont know if the shock going was because of the lift or not but I want something stiffer anyway. It is no longer covered by warranty because of the lift install. I will let you know how this works out:)
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top