Dodge Nitro Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
Ok to start off I had a squeal when steering and found the old sway bar bushings had worn out so I put on the 33mm bushings but it still squeaks just as loud as the old ones when you move the steering wheel back and forth! Was this bushings to big or is the noise coming from something else?
 

·
Registered
Joined
·
80 Posts
Ok to start off I had a squeal when steering and found the old sway bar bushings had worn out so I put on the 33mm bushings but it still squeaks just as loud as the old ones when you move the steering wheel back and forth! Was this bushings to big or is the noise coming from something else?
Old steering fluid? Flush with new but read instructions before. You can do this flush without engine running.

If you flush with engine running let the car sit one day to have air bubbles gone.
 
1 - 3 of 3 Posts
Top