Dodge Nitro Forum banner

To wetsand or not to wetsand

1024 Views 1 Reply 2 Participants Last post by  NitroTech
So it only took two weeks for it to happen, I had a van pull in to close to me and open his door into the side of my Nitro. The good this is that I don't have a door ding only some white residue from his door.

The question here is should I wetsand this to remove? I tried some #7 clearcoat polish without any luck. I'm just not sure of the wetsand (what grit, how to attack, etc) without screwing up my door and making this worse.

Any suggestions would be great appreciated.
1 - 1 of 2 Posts
Probably won't need to wetsand. A low/medium grit rubbing compound should do the job. Follow that with a good glaze and then a paste wax. Should be good as new after that.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.