[ShoesRT]

Hi all, got some PIAA turn signals and looking under the hood, I see no way to be able to stick my hand in there to install them like the manual says. Has anyone swapped out these bulbs have an easy way to install?

 

[Waldorf]

Hi all, got some PIAA turn signals and looking under the hood, I see no way to be able to stick my hand in there to install them like the manual says. Has anyone swapped out these bulbs have an easy way to install?

I had a heck of a time with my wife's SX 2.0 (read Dodge Neon) last year trying to do the same thing. On that vehicle, you had to take the wheel well cover off to get at the bulb area. Maybe the Nitro is the same?

 

[Ace43]

I think the battery has to come out. For the drivers side. And someone with a skinny arm to do the passenger side.I thought I say somewhere the grill and headlight assembly on the Nitro comes out as a whole unit.But on my Neon I just took the headlight assembly out to swap them but the side maker lights you had to go through the wheel well.

 

[NJNitro22]

Driver side wheel well has an access panel. But you might have to remove the wheel for more room.

 

[Nicktro]

i had to take my front grill surrounding off..that goes over the lights to get to it

 

[catalyst105]

It takes about 4 minutes to take the whole grill and headlights out. They come out together.