Wanting To Buy This Shift Knob....will It Fit??

Discussion in 'Dodge Nitro Interior Modifications' started by Basshead4life, Feb 7, 2018.

  1. Basshead4life

    Basshead4life Active Member NOTM Winner!

    Joined:
    May 20, 2016
    Messages:
    75
    Likes Received:
    137
    Gender:
    Male
    Location:
    Knoxville, Tennessee
    Vehicle:
    08 Nitro SLT, 4X4, 3.7L
    Trim:
    SLT
    Color:
    Bright Silver Metallic
  2. Scar0

    Scar0 Khaki Nitro Nut Moderator Member Relations NOTM Winner!

    Joined:
    Sep 23, 2007
    Messages:
    25,493
    Likes Received:
    2,515
    Location:
    SW WA State
    Vehicle:
    07Lifted,4X4,6sp-man,3.7L
    Trim:
    SXT
    Color:
    Light Khaki Metallic
    Not compatible with the 08 Libby but is with the 2011? They have the same trany! Which goes for the 3.7 Nitro. However, I do not know if the shifter is set up exactly the same as the Nitro. If the Nitro console is a little taller, it may not work.
    But, You can be the first one to try it...
     
    Basshead4life likes this.
  3. Basshead4life

    Basshead4life Active Member NOTM Winner!

    Joined:
    May 20, 2016
    Messages:
    75
    Likes Received:
    137
    Gender:
    Male
    Location:
    Knoxville, Tennessee
    Vehicle:
    08 Nitro SLT, 4X4, 3.7L
    Trim:
    SLT
    Color:
    Bright Silver Metallic

    Yep I think I'm going to try it at least!
     
  4. Scar0

    Scar0 Khaki Nitro Nut Moderator Member Relations NOTM Winner!

    Joined:
    Sep 23, 2007
    Messages:
    25,493
    Likes Received:
    2,515
    Location:
    SW WA State
    Vehicle:
    07Lifted,4X4,6sp-man,3.7L
    Trim:
    SXT
    Color:
    Light Khaki Metallic
    Basshead4life likes this.
  5. Metaldog

    Metaldog Well-Known Member NOTM Winner!

    Joined:
    Jan 14, 2016
    Messages:
    1,660
    Likes Received:
    1,063
    Gender:
    Male
    Location:
    Indianapolis
    Vehicle:
    2008 Dodge Nitro 4x4 3.7L
    Trim:
    SXT
    Color:
    Brilliant Black
    The shifter shaft diameter is 3/8" or 9.5 mm. The shift handled you're looking at will probably fit, but without exact specs, I would be hesitant to buy it.
     
    Basshead4life likes this.
  6. Basshead4life

    Basshead4life Active Member NOTM Winner!

    Joined:
    May 20, 2016
    Messages:
    75
    Likes Received:
    137
    Gender:
    Male
    Location:
    Knoxville, Tennessee
    Vehicle:
    08 Nitro SLT, 4X4, 3.7L
    Trim:
    SLT
    Color:
    Bright Silver Metallic
    They have a 30 day return policy so I may try it. I googled some of the other vehicles they listed and I believe it will work.
     
    Scar0 likes this.

Share This Page