Dodge Nitro Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
hiya ,wonder if anyone can help , i started up this morning and a laght stayed on (it looks like a coil spring ) mmy manual has not got this listed , any ideas out there 2.8 sxt crd cheeeeeeeeeeeeeeeeeeeers:smileup:
 

· Registered
Joined
·
33 Posts
hi and welcome from manchester
is it the glow plugs light if so turn the ignition so all the lights come on and wait til the coil light goes out then start the engine if the coil comes back on then think you might need some/all your plugs replaceing
but dont take my word for it.
some 1 more qualified will be allong with better advice soon
:smileup:
think its the law on here for you to introduce yourself in the noob section before asking qs
 

· Premium Member
07Lifted,4X4,6sp-man,3.7L
Joined
·
29,175 Posts
Welcome to the forum dean1467. :wave:
Sounds like your glow-plug light. It usually comes on when you turn your key to the "On" position. When it goes out (indicating they are up to temperature), then you can start your rig.

Dang your fast Mtl1! You nailed it! :rep:
 

· Premium Member
07Lifted,4X4,6sp-man,3.7L
Joined
·
29,175 Posts
Glad to help out, even if I was a little slow on the typing.
Got any Pics of your rig?
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top