Dodge Nitro Forum banner
1 - 4 of 4 Posts

·
Registered
07’ SLT 4x4 Lifted, 3.7 auto
Joined
·
795 Posts
Should…… can’t speak to the rubbing this will cause……… and it’s been awhile so I forget our bore size but it needs to match…….or u need to get to get hub rings to reduce it
 

·
Registered
07’ SLT 4x4 Lifted, 3.7 auto
Joined
·
795 Posts
I guess if u only use the back the rubbing is a moot point.
 

·
Registered
2011 Dodge Nitro Heat 3.7L
Joined
·
1,342 Posts
Yes. I used the same size made by ECCPP.
Stock wheel and just a front level and I had very minimum rub. (20x7.5 stock wheels with 245/50R20 tires)
71.5 is the Nitro hub bore.
5x4.5/114.3mm is the lug pattern.
They look to be hub-centric which is a PLUS!
 
1 - 4 of 4 Posts
Top