Anyone know how to remove the rear seat. I want to remove the middle seat belt to put on a seat cover.
fireman28
Lots of work! lol
Start by disconnecting the Neg (-) battery cable. Wait 10 minutes. (VERY IMPORTANT!)
Position the rear seats so that the seats are in a flat position.
Remove the four bolts from the cushion legs.
NOTE: Lift the bottom cushion and prop up to access the fasteners.
NOTE: Lift the bottom cushion and prop up to access the fasteners.
Start by disconnecting the Neg (-) battery cable. Wait 10 minutes. (VERY IMPORTANT!)
Position the rear seats so that the seats are in a flat position.
Remove the load floor panel from the load floor and the rear seat bracket.
Remove the three seat bracket nuts behind the seats.Remove the four bolts from the cushion legs.
NOTE: Lift the bottom cushion and prop up to access the fasteners.
Remove the two seat bracket nuts from the seat brackets.
Remove the center bracket bolts and the center seat belt.
Remove the electrical connector from the seat module.
Fold down the seat backs and remove from the vehicle.
Remove the center bracket bolts and the center seat belt.
Remove the electrical connector from the seat module.
Fold down the seat backs and remove from the vehicle.
Or start by disconnecting the Neg (-) battery cable. Wait 10 minutes. (VERY IMPORTANT!)
Remove the four bolts from the cushion legs.NOTE: Lift the bottom cushion and prop up to access the fasteners.
Then you can remove the center bracket bolts and the center seat belt.
)-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
